Command: *Cancel*

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*

Command:
Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command: XL
XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]:
Specify through point:
Specify through point: *Cancel*

Command:
Command: 3DO
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: L
LINE
Specify first point:
Specify next point or [Undo]: per
to
Specify next point or [Undo]:
Resuming LINE command.

Specify next point or [Undo]: _u
Specify next point or [Undo]:
Resuming LINE command.

Specify next point or [Undo]: per
to
Specify next point or [Undo]: *Cancel*

Command: UCS

Current ucs name:  *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:
Specify point on X-axis or <accept>:
Specify point on the XY plane or <accept>:
Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command:
Command:
Command:
Command: CIRCLE

Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Resuming CIRCLE command.

Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <0.951>:
Automatic save to C:\Users\maria\AppData\Local\Temp\Drawing7_1_16674_bf7830ef.sv$ ...

Command:
Command: *Cancel*

Command: 3DO
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command:
Command: _.erase 1 found

Command: UCS

Current ucs name:  *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command:
Command: UCS

Current ucs name:  *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:
Specify point on X-axis or <accept>:
Specify point on the XY plane or <accept>:
Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command:
UCS

Current ucs name:  *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command: _u UCS
Command: _u UCS
Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>: x

Specify rotation angle about X axis <90>:

Command: CIRCLE

Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <0.772>:
Command: _u CIRCLE
Command: ci
Unknown command "CI".  Press F1 for help.

Command: CIRCLE

Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <0.772>: *Cancel*

Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command: 3DO
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: *Cancel*

Command: UCS

Current ucs name:  *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:
Specify point on X-axis or <accept>:
Specify point on the XY plane or <accept>:
Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>: x

Specify rotation angle about X axis <90>: 90

Command:
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <0.772>:
Resuming CIRCLE command.

Specify radius of circle or [Diameter] <0.772>:
Command: *Cancel*

Command:
Command: _.erase 1 found

Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command: UCS

Current ucs name:  *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:
Specify point on X-axis or <accept>:
Specify point on the XY plane or <accept>:
Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>: x

Specify rotation angle about X axis <90>: 90

Command: CIRCLE

Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <0.772>:
Command: *Cancel*

Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command: 3DO
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: *Cancel*

Command: ALIGN

Select objects: 1 found

Select objects:

Specify first source point:
Specify first destination point:
Specify second source point:
Specify second destination point:
Specify third source point or <continue>:
Specify third destination point:
Command:
Command: AL
ALIGN
Select objects: 1 found

Select objects:

Specify first source point:
Specify first destination point:
Specify second source point:
Specify second destination point:
Specify third source point or <continue>:
Specify third destination point:
Command:
Command: 3DO
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command:
Crossing Lasso  Press Spacebar to cycle options
Command:
Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Window Lasso  Press Spacebar to cycle options
Command:
Command: 3DO
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: UCS

Current ucs name:  *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: _.erase 1 found

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: _.erase 5 found

Command:
Command:
Command: _.erase 1 found

Command:
Command: CIRCLE

Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: *Cancel*

Command: *Cancel*

Command:
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 3P
Specify first point on circle:
Specify second point on circle:
Specify third point on circle:
Command: 3DO
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command:
Command:
Command: *Cancel*

Command: OS
OSNAP
Command: ARRAYCLASSIC

Select objects: 1 found

Select objects:

Specify center point of array:
Command:
Command:
Command:
Automatic save to C:\Users\maria\AppData\Local\Temp\Drawing7_1_16674_bf7830ef.sv$ ...

Command:
Command: _.erase 1 found

Command: 3DO
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: _copyclip 6 found

Command:
Command:
Command: _pasteclip Specify insertion point:
Command:
Command:
Command:
Command: _QSAVE
Command: AL
ALIGN
Select objects: 1 found

Select objects: *Cancel*

Command:
ALIGN

Select objects: Specify opposite corner: 6 found

Select objects:

Specify first source point:
Specify first destination point:
Specify second source point:
Specify second destination point:
Specify third source point or <continue>:
Specify third destination point:
Command: _u GROUP
Command: AL
ALIGN
Select objects: 1 found

Select objects:

Specify first source point:
Specify first destination point:
Specify second source point:
Specify second destination point:
Specify third source point or <continue>:
Specify third destination point:
Command:
Command: _u '.3DPAN2
Command: _u GROUP
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: _rotate
Current positive angle in UCS:  ANGDIR=counterclockwise  ANGBASE=0
6 found

Specify base point:
Specify rotation angle or [Copy/Reference] <63>: *Cancel*

Command: UCS

Current ucs name:  *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>: x

Specify rotation angle about X axis <90>:

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: RO
ROTATE
Current positive angle in UCS:  ANGDIR=counterclockwise  ANGBASE=0
6 found

Specify base point:
Specify rotation angle or [Copy/Reference] <63>:
Command:
Command: AL
ALIGN
Select objects: Specify opposite corner: 0 found
Select objects: Specify opposite corner: 6 found

Select objects:

Specify first source point:
Specify first destination point:
Specify second source point: _u
Invalid input.

Specify second source point: _u
Invalid input.

Specify second source point: *Cancel*

Command: AL
ALIGN
Select objects: Specify opposite corner: 6 found

Select objects:

Specify first source point:
Specify first destination point:
Specify second source point:
Specify second destination point:
Specify third source point or <continue>:
Specify third destination point:
Command:
Command: UCS

Current ucs name:  *NO NAME*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>:

Command:
Command:
Command:
Command:
Command: 3DO
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: